TL Type S front bbk

[cuttyman9]

TL Type-S front BBK parts list

__________Calipers___________
-2011-17 Maserati ghibli calipers (6P)
PN 20.A001.05 and 20.A001.06

__________Rotors____________
-370z front rotors(sport rotors, 355x32)
https://www.rockauto.com/en/catalog/nissan,2015,370z,3.7l+v6,3310085,brake+&+wheel+hub,rotor,1896

_________Hardware___________
-4x m12-1.75 x90 socket cap screw
(full thread isn’t available 90mm works with the most engagement)

- 4x M14-2.0x40

___________Extras____________
-68.1 mm - 64.1 mm hub rings.
Aluminum ones are a better choice.

[cuttyman9]

Pictures
(courtesy of Julian Lightbody)


This swap is pretty straight forward, the bracket only goes on one way and the hardware fits specific holes. Nothing super fancy about it.
Typically you remove the backing plate all together but trimming and bending is probably possible.


The stock Type S wheel(with 1” spacer) didn’t clear, it still rubbed. It’s possible there’s enough meat to clearance the caliper and make it fit.

The stock TL wheel (with 1” spacer) did clear, it’s possible there’s enough meat to clearance the caliper and use a smaller spacer.

[cuttyman9]

************************DISCLAIMER*********************
 
The person that is purchasing this product makes the following representations and acknowledges and agrees to the following terms and conditions:
 
This off-road race only product ("this Product") is designed and intended for use in organized, amateur and professional racing events, but is limited to closed-course racing and open-course racing that is formally sanctioned by a recognized racing organization involving the motor vehicle in which it is installed (the "Vehicle"). It is not for use on public highways or roads nor is it for recreational off-road use other than solely for competition purposes. The person or entity buying this Product and/or using this Product (the "User") agrees to use the Vehicle solely for competition uses as described herein.
 
The User accepting this disclaimer acknowledges and hereby indemnifies and saves harmless Overkill Engineering, its officers, employees, agents, distributors and dealers for any damages, penalties, fines, expenses or other costs which may arise from the use of this Product and without limiting the generality of the foregoing specifically acknowledges the following:
 
   Use of this Product for purposes other than solely for competition is a violation of federal law and may violate applicable state or local environmental, motor vehicle and other laws. The User warrants that this Product shall only be used in sanctioned closed-circuit events.
-That use of this Product may violate warranties from the manufacturer of the Vehicle or from others.
-That use of this Product may make the Vehicle unfit or unsafe for the purposes intended or for any purpose and cause personal injury, property damage or death.
-That the installation of this Product, improper installation of this Product, use of this Product with other components or failure to use this Product in conjunction with other components, could result in or cause personal injury, property damage or death.