+- +-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Stats ezBlock

Members
Total Members: 2217
Latest: fahjcbymz
New This Month: 28
New This Week: 0
New Today: 0
Stats
Total Posts: 425
Total Topics: 139
Most Online Today: 13
Most Online Ever: 102
(September 23, 2020, 02:56:22 PM)
Users Online
Members: 0
Guests: 8
Total: 8

Author Topic: TL Type S rear BBK  (Read 3788 times)

cuttyman9

  • Administrator
  • Celica Engineer
  • *****
  • Posts: 216
  • Rep: +1/-0
TL Type S rear BBK
« on: June 27, 2020, 04:12:19 PM »
Acura TL Type S rear BBK

Rear kits are always a pain without making expensive custom rotors or omitting the parking brake. I’ve managed to make it work with the factory parking brake so even though this is a bit extensive to fit this to the car it does work and you won’t be chasing custom rotor rings and obscure pads like with many aftermarket companies.

——-Calipers——-
-Ss Camaro rear calipers
-Tesla model S rear calipers
-Maybe but not confirmed Ctsv v1 and v2
-Non-hellcat Srt8/srt challenger and charger (require a notch near the parking brake area to fit this kit)

Confirm the calipers with these PN’s (20.662.00 for left and right)

——-Rotors——-
370z sport rear rotors (durago br900722)
https://www.rockauto.com/en/catalog/nissan,2015,370z,3.7l+v6,3310085,brake+&+wheel+hub,rotor,1896

——Hardware—-
4x M10-1.5 x 50mm  Hex head screws— link below, confirm the specs before ordering
https://www.fastenal.com/products/details/11113836

4x M10-1.5 lock nuts — link below, confirm the specs before ordering



4x M12-1.75 x 60mm socket cap screws — link below, confirm the specs before ordering

https://www.fastenal.com/product/fasteners/sockets/socket-cap-screws/600040?categoryId=600040&level=3&aggregationSection=true&Dia%2FThread+Size=M12-1.75&Finish=Zinc&Grade=Class+12.9&Length=60mm&showAll=Dia%2FThread+Size&showAll=Length&selectedAggregation=Length

———Extras———

—5mm spacers (used between the rotor and hub to align the parking brake drum, otherwise it drags on the backing plate. A 3mm spacer could be used with a washer spacing the caliper toward the inside of the car, but it’s a little on the tight side and use at your own risk)

—requires longer studs (arp part number 100-7712, 1 per side)

—Hub rings- 64.1 to 68.1 (Honda to Nissan)
You’ll need to cut them down so it only touches the rotor.
(This is the save cost over spending ~100 for custom aluminum hub rings)

^Hub rings are used to center the Nissan rotor to the Honda hub, they will need to be cut down to sit flush with the rotor so that the wheel hub ring fits.
« Last Edit: August 20, 2021, 12:43:52 PM by cuttyman9 »
Founder of "Official 5th Gen Celica" on Facebook
92 Celica GT 2gr
99 F150 4.6/t56
71 Cutlass 350olds/tr6060
75 Trans Am 455pont/t56
67 Chevelle 5.0/t56
66 C20 LB 478 v6/s6 650
36 Chevy Master Coupe
71 Triumph Stag
91 300zx TT
92 Subaru SVX
92 Stealth RT/TT
88 Corolla GT-S
92 Typhoon

cuttyman9

  • Administrator
  • Celica Engineer
  • *****
  • Posts: 216
  • Rep: +1/-0
Re: TL Type S rear BBK
« Reply #1 on: September 11, 2020, 09:53:28 PM »
Pictures thanks to Chris Cansler!
He was the first to install the rear kit.

The backing plate was removed, it’s possible it can be trimmed and bent back but removing it insures you have plenty of room.

This shows the longer studs and the spacer used to offset the rotor to clear the parking brake drum.

You can see the increase in leverage with the larger diameter these rotors offer.
« Last Edit: August 20, 2021, 12:50:31 PM by cuttyman9 »
Founder of "Official 5th Gen Celica" on Facebook
92 Celica GT 2gr
99 F150 4.6/t56
71 Cutlass 350olds/tr6060
75 Trans Am 455pont/t56
67 Chevelle 5.0/t56
66 C20 LB 478 v6/s6 650
36 Chevy Master Coupe
71 Triumph Stag
91 300zx TT
92 Subaru SVX
92 Stealth RT/TT
88 Corolla GT-S
92 Typhoon

cuttyman9

  • Administrator
  • Celica Engineer
  • *****
  • Posts: 216
  • Rep: +1/-0
Re: TL Type S rear BBK
« Reply #2 on: September 14, 2020, 05:03:48 PM »
Here are some pictures of them fully installed.
(Photos courtesy of Chris Cansler and Manuel Alcaraz)

The last picture is something that was brought up to me later.
It seems the control arm mount that runs diagonal that the bracket has a big notch to clear it varies quite heavily.
Between 3 we’ve seen installed there’s been one that clears fine, one that required a little clearancing of the stock knuckles casting flash and the other that took a good bit of clearancing so be aware that it might require a little bit of grinding until the knuckle casting is smooth if you’re one of the unlucky ones. It doesn’t seem to matter if it’s TL base or Type S, it’s just casting variation on Honda’s part.
« Last Edit: August 20, 2021, 01:02:48 PM by cuttyman9 »
Founder of "Official 5th Gen Celica" on Facebook
92 Celica GT 2gr
99 F150 4.6/t56
71 Cutlass 350olds/tr6060
75 Trans Am 455pont/t56
67 Chevelle 5.0/t56
66 C20 LB 478 v6/s6 650
36 Chevy Master Coupe
71 Triumph Stag
91 300zx TT
92 Subaru SVX
92 Stealth RT/TT
88 Corolla GT-S
92 Typhoon

cuttyman9

  • Administrator
  • Celica Engineer
  • *****
  • Posts: 216
  • Rep: +1/-0
Re: TL Type S rear BBK
« Reply #3 on: September 14, 2020, 05:07:31 PM »
************************DISCLAIMER*********************
 
The person that is purchasing this product makes the following representations and acknowledges and agrees to the following terms and conditions:
 
This off-road race only product ("this Product") is designed and intended for use in organized, amateur and professional racing events, but is limited to closed-course racing and open-course racing that is formally sanctioned by a recognized racing organization involving the motor vehicle in which it is installed (the "Vehicle"). It is not for use on public highways or roads nor is it for recreational off-road use other than solely for competition purposes. The person or entity buying this Product and/or using this Product (the "User") agrees to use the Vehicle solely for competition uses as described herein.
 
The User accepting this disclaimer acknowledges and hereby indemnifies and saves harmless Overkill Engineering, its officers, employees, agents, distributors and dealers for any damages, penalties, fines, expenses or other costs which may arise from the use of this Product and without limiting the generality of the foregoing specifically acknowledges the following:
 
   Use of this Product for purposes other than solely for competition is a violation of federal law and may violate applicable state or local environmental, motor vehicle and other laws. The User warrants that this Product shall only be used in sanctioned closed-circuit events.
-That use of this Product may violate warranties from the manufacturer of the Vehicle or from others.
-That use of this Product may make the Vehicle unfit or unsafe for the purposes intended or for any purpose and cause personal injury, property damage or death.
-That the installation of this Product, improper installation of this Product, use of this Product with other components or failure to use this Product in conjunction with other components, could result in or cause personal injury, property damage or death.
Founder of "Official 5th Gen Celica" on Facebook
92 Celica GT 2gr
99 F150 4.6/t56
71 Cutlass 350olds/tr6060
75 Trans Am 455pont/t56
67 Chevelle 5.0/t56
66 C20 LB 478 v6/s6 650
36 Chevy Master Coupe
71 Triumph Stag
91 300zx TT
92 Subaru SVX
92 Stealth RT/TT
88 Corolla GT-S
92 Typhoon

 

+-Recent Topics

Is300/gs300 dual rear caliper setup (drifting/hydro/etc) by cuttyman9
August 10, 2021, 02:26:56 AM

Almost lost all hope and motivation for my celica by cuttyman9
June 09, 2021, 02:43:33 PM

Long awaited GS300 BBK by cuttyman9
April 21, 2021, 09:02:47 AM

Bolt in 2grfe swap into a 5th gen celica. by cuttyman9
April 20, 2021, 06:17:27 PM

Hello new here by cuttyman9
March 18, 2021, 12:23:22 PM

IS300/GS300 Rear BBK by cuttyman9
September 24, 2020, 02:42:43 PM

IS300 front BBK by cuttyman9
September 24, 2020, 02:41:38 PM

TL Type S rear BBK by cuttyman9
September 14, 2020, 05:07:31 PM

Svx Front BBK by cuttyman9
September 14, 2020, 05:03:12 PM

TL Type S front bbk by cuttyman9
September 14, 2020, 05:02:36 PM

Powered by EzPortal