Been working on something like this, of course it comes when PayPal screws me.
90-93 Celica bbk.
Will work on 4/5/6/7g, Corolla, matrix with adjustments in spacing similar to the other Celica bbk.
You'll need:
——————CALIPERS—————
02-10 VW Toureg
03-10 Porsche Cayenne
05-15 Audi Q7
(I have found car-part.com is the cheapest place to search, its an annoying website but yields the cheapest prices outside of local junkyards)
The calipers should say 17ZL and 17ZR (it’s come to my attention most parts stores show the rotor size, 330mm instead of 17z or 18z)
PNs 20.8432.06 and 20.8432.05 (see pictures)
(use these numbers to confirm, there are many calipers that look similar but wont work)
—————-HARDWARE—————-
4x M12-1.75x25 (McmasterCarr.com PN 98093A746) (shave to clear rotor/flush with the bracket)
4x Hex M16-1.5x50 caliper bolts
(You can’t reuse the hardware from Cayenne/Toureg/Q7, they are too short)
(Mcmastercarr.com PN 91052A122 or equivalent)
———————-ROTORS—————-
2x 2006-2020 is350 rotor-front iron brake rotor (334x30mm)
They are 5x114.3, Redrilling the rotor is required if you are retaining 5x100.
Hub rings are also required to match the rotor to the smaller hub center
————————extras———————
Stock brake lines can be used although I would recommend getting stainless braided lines as it improves feel vastly.
***18z calipers WILL NOT WORK***
If you purchased calipers bare the hardware to mount the pads can be had here:
https://audibbkparts.bigcartel.com/product/brembo-17z-18z-caliper-hardware-kit
