My Community

Celica Information => Vehicle Build => Topic started by: dlopez4 on August 10, 2015, 08:48:53 AM

Title: 91 gts 5sfe turbo
Post by: dlopez4 on August 10, 2015, 08:48:53 AM

My 5s turbo build
Parts that will be using
Walbro fuel pump
315cc lime green injectors (supra injectors)
3sgte 2 Bar map sensor
forged rods from max speeding
Arp head studs or bolts
New 5s head
MLS head gasket Victor r.
New 5s crank
clevit rods an mains
stock ct26
Stock 3sgte manifold
srt4 fmic
2 stage boost controller

it's hard to remember all my parts of the top of my head
when I start to put back together I'll post updates

Title: Re: 91 gts 5sfe turbo
Post by: cuttyman9 on August 10, 2015, 06:31:48 PM

Which generation supra?

Title: Re: 91 gts 5sfe turbo
Post by: dlopez4 on August 11, 2015, 12:00:48 AM

They are third Gen supra injectors N/A motor.

Title: Re: 91 gts 5sfe turbo
Post by: dlopez4 on July 15, 2016, 04:17:29 PM

Well I went with fully forged bottom end with lower compression ratio with a cometic head gasket cp pistons 8.8:1. (can't remember of the top of my head ) but now I will be working on putting a megasquirt together with 1000cc an run e85. hopping to push 20 psi though I'd update you guys on the forum.

Title: Re: 91 gts 5sfe turbo
Post by: cuttyman9 on July 20, 2016, 11:44:24 AM

Awesome!
I will post the static compression calculator soon if you know the specs on the parts you have in there. The Pistons I have put me at about 9.6-1 compression

Title: Re: 91 gts 5sfe turbo
Post by: Martinezgt92 on December 22, 2017, 01:37:05 AM

wish you the best good luck  ;)