+- +-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Stats ezBlock

Members
Total Members: 2871
Latest: Mike24
New This Month: 4
New This Week: 0
New Today: 0
Stats
Total Posts: 461
Total Topics: 146
Most Online Today: 44
Most Online Ever: 105
(November 18, 2023, 09:59:57 AM)
Users Online
Members: 0
Guests: 43
Total: 43

Author Topic: 5x114.3 Swap  (Read 4014 times)

cuttyman9

  • Administrator
  • Celica Engineer
  • *****
  • Posts: 245
  • Rep: +1/-0
5x114.3 Swap
« on: January 07, 2015, 12:56:02 AM »
The car: 1992 Celica GT

Plan: Swap from 5x100 to 5x114.3(4.5) bolt pattern

Prior to this post there weren't any definitive how-to's

This works for 86-99 celicas, but note there are variances between different years. I will list a few I've encountered helping people do this swap.

For 92-99 celica GT/GTS
Parts needed:
-1996-00 Rav4 front hubs (XA10)
-1992-01 Camry rear hubs
-1992-01 Camry V6 rotors (front and rear)
-10x 1/16" washers (high grade preferred) -> or a thin spacer ~ 1.5mm or the thickness of a quarter
-inner and outer front seals for the front hubs x2 (recommended to change with new bearings)
-1986-99 celica front wheel bearings (recommended to change with new hubs)


***1986-91 Celica GTS***
Parts needed:
-1996-00 RAV4 Front hubs (XA10)
-1992-01 Camry Rear hubs
-1992-01 Camry V6 rotors (front and rear)
-1992-99 Celica Front calipers and caliper brackets
-10x 1/16" washers (high grade preferred) -> or a thin spacer ~ 1.5mm or the thickness of a quarter
-inner and outer front seals for the front hubs x2 (recommended to change with new bearings)
-1986-99 celica front wheel bearings (recommended to change with new hubs)


***1986-91 celica ST/GT and 1992-1999 ST (Drum rear brakes)***
-Use the same as GTS but either swap to disc in the rear or use a Camry rear drum(usually on 4 cup. Model)



the rest are images of the rest of the part I found off another forum






camry left, celica right


camry hub on a junkyard celica








camry rear brake disc vs the celica one
thickness of the rotor is only marginally bigger on the camry otherwise they are identical


camry top, celica bottom


*** update ***
Washers have been shown to cause a bit of an issue digging into the hub.
Buying a thin wheel spacer of the same size is a better idea (3mm are available, 2mm would be custom)
Washers still work, but might have different effects. I didn't have issues but one other person did.



Thank you for reading


« Last Edit: June 28, 2022, 06:17:44 PM by cuttyman9 »
Founder of "Official 5th Gen Celica" on Facebook
92 Celica GT 2gr
99 F150 4.6/t56
71 Cutlass 350olds/tr6060
75 Trans Am 455pont/t56
67 Chevelle 5.0/t56
66 C20 LB 478 v6/s6 650
36 Chevy Master Coupe
71 Triumph Stag
91 300zx TT
92 Subaru SVX
92 Stealth RT/TT
88 Corolla GT-S
92 Typhoon

dazany4002

  • Celica N00B
  • *
  • Posts: 1
  • Rep: +0/-0
  • *new*
Re: 5x114.3 Swap
« Reply #1 on: September 21, 2016, 08:27:57 AM »
I did this swap this week (fronts only so far). I used a hub puller tool and a slide hammer, both rented from auto zone, to remove the hub. The bolt that allows everything to come apart will need a 30mm socket. Here's the bump I ran into when taking everything apart:
When I pulled the Celica hubs off, the inner race of the wheel bearing came out with both hubs. I was unable to remove the inner race from the hub and at some point nicked one of the inner races. As a result I ended up buying new wheel bearings and paying my mechanic to press them back in. This increased the cost of the swap by approximately $280 and made the work I put in pointless since the mechanic redid everything I had previously done when he replaced the wheel bearings.
Other than that, I went with the washers instead of the spacer (about dime to quarter width). The car feels great.

Cost:
Rav4 hubs x 2 - $55 (ebay)
Camry Rotors x 2 - $70 (auto zone)
Washers x 10 - $4
Seals (Inner x 2, Outter x 2) - $50

That's about $180 for the front swap with new parts if you're able to do it without replacing the wheel bearings.

 

+-Recent Topics

TL Type S rear BBK by cuttyman9
March 25, 2024, 11:37:07 PM

PHOTO CONTEST password!!! by cuttyman9
March 24, 2024, 11:56:05 AM

Volvo EPS info/install/etc by cuttyman9
March 18, 2024, 02:26:33 PM

Gen 5 Celica Manuals (inc Workshop , 4WS , Radio & Wiring) by Cyra
February 27, 2024, 07:27:38 AM

Svx eps swap by cuttyman9
December 30, 2023, 09:33:25 PM

Bolt in 2grfe swap into a 5th gen celica. by cuttyman9
November 24, 2023, 03:58:01 PM

Sc300/sc400/Supra rear BBK by cuttyman9
October 10, 2023, 12:33:11 PM

Is250/IS350 rear bbk by cuttyman9
October 10, 2023, 11:51:54 AM

Is300/gs300 dual rear caliper setup (drifting/hydro/etc) by cuttyman9
October 10, 2023, 11:46:30 AM

3000gt VR4 Front BBK by cuttyman9
October 10, 2023, 11:14:29 AM

Powered by EzPortal