My Community

Members => General Discussion => Topic started by: cuttyman9 on June 23, 2020, 01:48:00 AM

Title: Svx Front BBK
Post by: cuttyman9 on June 23, 2020, 01:48:00 AM
You'll need:

——————CALIPERS—————

2018-2020 gt350 front calipers


——————HARDWARE————
4x M14-2.0 x100 (Fastenal PN 0141772 socket cap head)
https://www.fastenal.com/products/details/0141772

4x M12-1.75 x50 (Fastenal PN 11551754 hex head)
https://www.fastenal.com/products/details/11551754

———————-ROTORS—————-
2008-2013 Cadillac CTS-V front rotors (1pc, 2pc available but unconfirmed)
(Rock auto, Centric PN 12162128, double check it’s indeed for the V not the base model)

———————-PADS——————-
2008-2013 Cadillac CTS-V front pads
(Rock auto, API PN 1402275234)


——Misc——
Hub rings (used to match the rotor to the hub)
56.1 Subaru size to 66.9 cadillac size.
Cut them down till they sit flush with the rotor face.



The rotors need to have the bolt holes opened up to fit 5x114.3 since they are 5x120.
Otherwise it should all be bolt on.






Pictures courtesy of Trevor Brown
Title: Re: Svx Front BBK
Post by: cuttyman9 on September 14, 2020, 05:02:53 PM
Pictures
Title: Re: Svx Front BBK
Post by: cuttyman9 on September 14, 2020, 05:03:12 PM
************************DISCLAIMER*********************
 
The person that is purchasing this product makes the following representations and acknowledges and agrees to the following terms and conditions:
 
This off-road race only product ("this Product") is designed and intended for use in organized, amateur and professional racing events, but is limited to closed-course racing and open-course racing that is formally sanctioned by a recognized racing organization involving the motor vehicle in which it is installed (the "Vehicle"). It is not for use on public highways or roads nor is it for recreational off-road use other than solely for competition purposes. The person or entity buying this Product and/or using this Product (the "User") agrees to use the Vehicle solely for competition uses as described herein.
 
The User accepting this disclaimer acknowledges and hereby indemnifies and saves harmless Overkill Engineering, its officers, employees, agents, distributors and dealers for any damages, penalties, fines, expenses or other costs which may arise from the use of this Product and without limiting the generality of the foregoing specifically acknowledges the following:
 
   Use of this Product for purposes other than solely for competition is a violation of federal law and may violate applicable state or local environmental, motor vehicle and other laws. The User warrants that this Product shall only be used in sanctioned closed-circuit events.
-That use of this Product may violate warranties from the manufacturer of the Vehicle or from others.
-That use of this Product may make the Vehicle unfit or unsafe for the purposes intended or for any purpose and cause personal injury, property damage or death.
-That the installation of this Product, improper installation of this Product, use of this Product with other components or failure to use this Product in conjunction with other components, could result in or cause personal injury, property damage or death.