My Community
Members => General Discussion => Topic started by: cuttyman9 on April 04, 2022, 07:20:41 PM
-
Sc300/sc400/soarer/supra mk4 front 17z bbk writeup
You'll need:
——————CALIPERS—————
02-10 VW Toureg
03-10 Porsche Cayenne
05-15 Audi Q7
NOTE: I have found car-part.com is the cheapest place to search(60 per caliper) It’s an annoying website but yields the cheapest prices outside of local junkyards which are the cheapest (25 per caliper)
The calipers should say 17ZL and 17ZR (it’s come to my attention most parts stores show the rotor size, 330mm instead of 17z so tell them 330mm is the caliper you need lol)
PNs 20.8432.06 and 20.8432.05 (see pictures)
(use these numbers to confirm, there are many calipers that look similar but wont work)
—————-HARDWARE—————-
4x M12-1.75x30 (McmasterCarr.com PN 90128A297 - Socket cap style bolt or equivalent)
4x SCH M16-1.5x40 caliper bolts
(or reuse the hardware from Cayenne/Toureg/Q7 on the top bolt hole, the lower holes are too close to other things)
(Mcmastercarr.com PN 96144A330)
8x Fastenal PN 0136087 or 1245L from ace hardware
https://www.fastenal.com/products/details/0136087
(~2.5mm thick)
———————-ROTORS—————-
Rotor specs should be 356x30mm- confirm that before ordering as there are many that are 334 which will not work.
1x 2013-2018 GS350 F sport rotor-121.44204 front iron brake rotor (Centric PN shown)
1x 2013-2018 GS350 F sport rotor-121.44205 front iron brake rotor (Centric PN shown)
**These are not gsf rotors. Is350 f sport do not work either.
Only gs350 F sport.**
Stock brake lines can be used although I would recommend getting stainless braided lines as it improves feel vastly.
Make sure to take the crossover lines and bleeders off and switch sides with them (because the cayenne/q7/Touareg have the caliper on the front of the knuckle and the is300 has them on the rear of the knuckle)
NOTE: Calipers will need to be modified to clear the rotors
NOTE: The Washers will go between the bracket and the caliper.
** UPDATE**
18z calipers WILL NOT WORK (without custom pads and more clearancing on the back but none for the rotor)
If you purchased calipers bare the hardware to mount the pads can be had here:
https://audibbkparts.bigcartel.com/product/brembo-17z-18z-caliper-hardware-kit
Edit: for 15” rotors it’s possible to use RCF rotors with 18z calipers.
Clearancing is still required and it hasn’t been fully tested but the test fit looks
-
Here are a few pictures.
This shows the clearancing involved, it’s just for the rotor on these, not the backside like the IS/GS/LS
-
************************DISCLAIMER*********************
The person that is purchasing this product makes the following representations and acknowledges and agrees to the following terms and conditions:
This off-road race only product ("this Product") is designed and intended for use in organized, amateur and professional racing events, but is limited to closed-course racing and open-course racing that is formally sanctioned by a recognized racing organization involving the motor vehicle in which it is installed (the "Vehicle"). It is not for use on public highways or roads nor is it for recreational off-road use other than solely for competition purposes. The person or entity buying this Product and/or using this Product (the "User") agrees to use the Vehicle solely for competition uses as described herein.
The User accepting this disclaimer acknowledges and hereby indemnifies and saves harmless Overkill Engineering, its officers, employees, agents, distributors and dealers for any damages, penalties, fines, expenses or other costs which may arise from the use of this Product and without limiting the generality of the foregoing specifically acknowledges the following:
Use of this Product for purposes other than solely for competition is a violation of federal law and may violate applicable state or local environmental, motor vehicle and other laws. The User warrants that this Product shall only be used in sanctioned closed-circuit events.
-That use of this Product may violate warranties from the manufacturer of the Vehicle or from others.
-That use of this Product may make the Vehicle unfit or unsafe for the purposes intended or for any purpose and cause personal injury, property damage or death.
-That the installation of this Product, improper installation of this Product, use of this Product with other components or failure to use this Product in conjunction with other components, could result in or cause personal injury, property damage or death.